<< Photo 2:
Photo 2 shows the factory set-up inside your van door.
The arrow on the left side of the photo points to the lock.
The arrow on the right side of the photo points to the factory lock clip holding the lock in place.
When a thief prys under the lock face on the outside of the door, this clip pops off the lock, and the lock can be pulled out of the door. Once the lock is loose, the door can be easily unlocked.
The whole process takes about 20 seconds!
Now see how the Jimmi' Jammer™ will prevent this from happening:
<< Photo 3:
Photo 3 shows the backside of an E-250 door lock, (inside the door) with the Jimmi' Jammer™ installed.
The lower left arrow points to the lock assembly. Without the Jimmi' Jammer™ iin place, the factory clip can be dislodged from the outside, and the lock moved to unlock the door.
The arrow on the right side of the photo points to the Backing Plate portion of the Jimmi' Jammer™. This plate reinforces the door metal and prevents the thief from pushing the door metal inward to get under the outside lock face.
The arrow on the upper left points to the Clip Replacement Plate portion of the Jimmi' Jammer™.. This plate slides on over the Backing Plate and holds the lock and Backing Plate in place. Three set screws are used to add strength to the assembly.
|