Jimmi' Jammer™ for Hummer H2 SUV and SUT Vehicles
The photo above shows where a thief pryed in
|
 Photo 2 Photo 2 above shows how a thief
punches the lock into the door.
|
||||||||
Both photos above are common methods of entry on these vehicles. Photo 3 to the right shows how a Jimmi' Jammer™ prevents this from happening. >> The backside of a door handle is shown, removed from the door for clarity. The lock and rod are also removed. The yellow arrow points to the lock area where the lock would protrude through the plate. This prevents the lock from being punched into the door. The Jimmi' Jammer™ also covers the length of the handle, along the bottom and side edges. This prevents prying along the edges of the handle to get at the lock rods inside the door. Photo 4 to the right shows the same handle, but from the front side. Here, the red arrow points to the Jimmi' Jammer™ plate that would normally be hidden behind the door metal. If the thief tries to pry in under the handle, the plate is inside the door blocking access to the lock rods and other components.
|
 3^Back side of door handle with Jimmi' Jammer™ |
||||||||
What about rear doors?On this body style, the rear doors are vulnerable too! The thieves can pry the handle away from the body just enough to get a wire or thin tool inside the door cavity. Then, they can move the internal rod at the latch to open the rear doors. This same method applies to front passenger doors that don't have a lock cylinder! If you have an H2, you need a set for both front and rear doors. (Sold separately.) Hummer H2 Application Part Numbers PN 021200 fits Hummer H2 SUV 03 and newer and SUT 05 and newer that have a lock on each front door. PN 021205 fits Hummer H2 SUV 03 and newer and SUT 05 and newer that have a lock on the drivers door only. PN 021210 fits Hummer H2 SUV/SUT REAR doors.
|
|
4
|
To see the GM model list
and pricing, click here
|